Skip to main content
Datasheets.com
Design DocumentInfineon

KIT_PSC3M5_EVK PSOC™ Control C3M5 Evaluation Kit Guide

User guide for the KIT_PSC3M5_EVK evaluation kit featuring the PSC3M5 MCU, KitProg3 debugger, Arduino Uno R3 headers, and CAN FD support for ModusToolbox-based development.

View design document

Overview

This document provides detailed information on the KIT_PSC3M5_EVK PSOC™ Control C3M5 Evaluation Kit. It features the PSC3M5 MCU (specifically the PSC3M5FDS2AFQ1) and an onboard KitProg3 programmer/debugger based on the PSoC 5LP microcontroller. The kit includes various expansion options via Arduino Uno R3, mikroBUS, and Infineon Shield2Go compatible headers. Integrated hardware includes a CAN FD transceiver, a potentiometer, user-configurable LEDs, and push buttons. The manual covers kit operation, out-of-the-box software examples, power supply configurations, hardware functional descriptions, and rework instructions for adding components such as SPI NOR flash, SMA connectors, or ETM trace debugging support.

Use Cases

  • Embedded system development with PSoC Control C3 MCUs
  • Motor control application prototyping
  • Industrial communication evaluation using CAN FD
  • Sensor interface development using Shield2Go and mikroBUS
  • Hardware benchmarking for PSC3M5 series microcontrollers

Topics

KIT_PSC3M5_EVK
PSC3M5
PSC3M5FDS2AFQ1
PSoC Control C3
KitProg3
ModusToolbox
CAN FD
Arduino Uno R3
Shield2Go
mikroBUS
Infineon

Referenced Parts

PSC3M5FDS2AFQ1

Infineon

PSOC™Control C3 MCU–PSC3M5FDS2AFQ1

PSOC 5LP

Infineon

PSOC™ 5LP-based KitProg3 (U2)

Shield2Go

Infineon

The evaluation board has two Infineon Shield2Go standard headers (S2GO) and one mikroBUS header for

J21

Infineon

17 Shield2Go-S2GO2 (J18 and J21) Infineon’s Shield2Go-compatible header

KIT_PSC3M5_EVK PSOC™ Control C3M5 Evaluation Kit Guide | Design Resources