MC9S08AW60
Freescale Semiconductor
To protect the MC9S08AW60 silicon it is shipped in a chip case and needs to be installed in the socket U3.
Design DocumentNxp
NXP DEMO9S08AW60E Quick Start Guide
Quick start guide for the DEMO9S08AW60E board featuring the MC9S08AW60 MCU, covering hardware setup, CodeWarrior installation, and integrated USB BDM debugging procedures.
Overview
This document provides setup and operation instructions for the Freescale DEMO9S08AW60E demonstration board. It details the installation of the MC9S08AW60 silicon into the onboard socket, default jumper settings for power management, and the installation of CodeWarrior Development Studio Version 5.0 for HC(S)08. The guide explains how to use the integrated USB-BDM for programming and debugging the MCU FLASH. It also includes functional tests for integrated peripherals, including the LED light bar, push buttons, dip switches, potentiometer, photocell, and accelerometer.
Use Cases
- Evaluating MC9S08AW60 microcontroller performance and features
- Setting up a development environment for HCS08 architecture
- Debugging firmware via integrated USB-BDM
- Prototyping sensor-based applications using on-board accelerometers and photocells
Topics
MC9S08AW60
DEMO9S08AW60E
Freescale
NXP
CodeWarrior
HCS08
USB-BDM
Microcontroller Evaluation
Accelerometer
Photocell
Referenced Parts
| MC9S08AW60 | Freescale Semiconductor | To protect the MC9S08AW60 silicon it is shipped in a chip case and needs to be installed in the socket U3. |