LPC11U37H
NXP
LPCXpresso v2 board with LPC11U37H MCU
Design DocumentNxp
NXP OM2NTP5332 NTAG 5 Development Board Getting Started Guide
Getting started guide for the OM2NTP5332 board used to evaluate NTAG 5 NFC bridge ICs (NTA5332) featuring I2C, GPIO, PWM, and energy harvesting capabilities.
Overview
This reference manual provides instructions for the OM2NTP5332 development board, designed for evaluating NXP NTAG 5 link and switch ICs, specifically the NTA5332. The guide covers hardware configurations including connector pinouts, switch settings for voltage selection (1.8V to 5V), and I2C pull-up management. It details the integration of NFC bridge features such as I2C master/slave modes, GPIO, PWM, and energy harvesting. The document also highlights compatibility with MCU evaluation boards like the LPC11U37H LPCXpresso and FRDM-KW41Z, and outlines software resources for Android, iOS, and firmware development for ISO15693 and NFC Forum Type 5 Tag applications.
Use Cases
- Embedded device data logging
- Microcontroller firmware updates via NFC
- Bidirectional NFC communication
- NFC energy harvesting for low-power sensors
- NFC-to-I2C bridging for MCU configuration
Topics
OM2NTP5332
NTAG 5
NTA5332
NFC bridge
I2C slave
I2C master
GPIO
PWM
energy harvesting
ISO15693
LPC11U37H
LPCXpresso
Referenced Parts
NTA5332
NXP
NTA5332 - NTAG 5 boost, NFC Forum-compliant I2C bridge for tiny devices
| LPC11U37H | NXP | LPCXpresso v2 board with LPC11U37H MCU |
| NTA5332 | NXP | NTA5332 - NTAG 5 boost, NFC Forum-compliant I2C bridge for tiny devices |