7630 Group
Renesas
Concerned Products 7630 Group
Design DocumentRenesas
Technical News: Additional Information for 7630 Group User's Manual
Technical correction for the Renesas 7630 Group User's Manual regarding status flag validity in decimal mode during ADC and SBC instructions.
Overview
This technical news document (No. 7600-06-0111) provides a correction for the Renesas 7630 Group User's Manual (Revision 2.0, December 1999). The update addresses a documentation error in section 3.3 concerning notes on status flags in decimal mode. It clarifies that only the overflow flag (V) is invalid after the execution of ADC or SBC instructions when decimal mode is selected, correcting previous text that erroneously included the negative (N) and zero (Z) flags.
Use Cases
- Firmware development for Renesas 7630 microcontrollers
- Debugging arithmetic operations in decimal mode
- Verifying CPU status register behavior
Topics
Renesas 7630 Group
7630 Group User's Manual
Status Register
Decimal Mode
ADC Instruction
SBC Instruction
V Flag
Microcontroller Errata
Referenced Parts
| 7630 Group | Renesas | Concerned Products 7630 Group |