TLE9273QX
Infineon
TLE9273QX Evaluation Board DCDC SBC Family
Design DocumentInfineon
TLE9273QX Evaluation Board User Manual
User guide for the TLE9273QX evaluation board, featuring hardware setup for the DCDC System Basis Chip (SBC) family with CAN and LIN transceivers.
Overview
This document provides a comprehensive getting started guide for the Infineon TLE9273QX Evaluation Board. It details the hardware components of the board, including banana sockets for VSUP and GND, VCC1 and VCC2 regulated outputs, and status LEDs for fail outputs and voltage rails. The manual describes onboard button functions for testing, forced resets, and wake-up triggers, alongside jumper configurations for FO pins, VCC2/VLIN supply selection, and VCAN input settings. Additionally, it provides instructions for using the uIO stick and ConfigWizard software to control the System Basis Chip (SBC) via SPI. Schematic diagrams and PCB layout designs are included for reference.
Use Cases
- Automotive electronic control unit (ECU) prototyping
- Evaluation of DCDC buck converter performance in SBCs
- Testing CAN and LIN communication interfaces
- Development of power management software via SPI
Topics
Infineon
TLE9273QX
Evaluation Board
System Basis Chip
SBC
DCDC Converter
CAN Transceiver
LIN Transceiver
uIO Connector
ConfigWizard
SPI Control
Automotive Power
Referenced Parts
| TLE9273QX | Infineon | TLE9273QX Evaluation Board DCDC SBC Family |