WirelessHART mote-on-chip integrates a 2.4 GHz IEEE 802.15.4 radio transceiver, embedded ARM Cortex-M3 processor, and SmartMesh WirelessHART networking software. The device operates from a 2.1 V to 3.76 V supply and supports time-synchronized channel-hopping mesh networking. Radio operation supports 15 channels at a 250 kbps raw data rate with typical receiver sensitivity of -93 dBm at 1 percent packet error rate. The device is specified for -40 °C to 85 °C operation in a 72-lead 10 mm by 10 mm plastic QFN package.
Checking distributor stock and pricing after the page loads.
Sign in to ask questions about the Analog Devices LTC5800-WHM datasheet using AI. Get instant answers about specifications, features, and technical details, ideal for finding information in larger documents.
Sign In to ChatWidest selection of semiconductors and electronic components in stock and ready to ship ™
| Wireless standard | WirelessHART (IEC62591), IEEE 802.15.4 |
| Frequency band | 2.4000 to 2.4835GHz |
| Number of channels | 15 |
| Channel separation | 5MHz |
| Raw data rate | 250kbps |
| Supply voltage | 2.1 to 3.76V |
| Operating temperature range | -40 to 85°C |
| Radio transmit current at 0 dBm | 5.4 typicalmA |
| Radio transmit current at 8 dBm | 9.7 typicalmA |
| Radio receive current | 4.5 typicalmA |
| Receiver sensitivity | -93 typical at 1% PERdBm |
| Transmit output power high setting | 8dBm |
| Transmit output power low setting | 0dBm |
| ADC resolution | 12bits |
| Processor core | ARM Cortex-M3 32-bit |
| Package | 72-lead plastic QFN, 10 mm x 10 mm x 0.85 mm |
Download the complete datasheet for Analog Devices LTC5800-WHM to view detailed technical specifications.
The embedded preview will load automatically when this section scrolls into view.
These are design resources that include the Analog Devices LTC5800-WHM
A comprehensive user guide for SmartMesh WirelessHART networks, covering network formation, manager configuration, security, mote operation, and system optimization.
User guide for Eterna Evaluation and Development Board Sets, covering hardware setup, interface boards, and programming for SmartMesh IP and WirelessHART networks.
Technical guide for the SmartMesh WirelessHART Manager API, covering XML-RPC protocols, network control commands, notification channels, and device management for Industrial IoT.
