Skip to main content
Design DocumentAnalog

Quick Start Guide for AD9634 Evaluation Board and HSC-ADC-EVALCZ Capture Board

Quick start guide for the Analog Devices AD9634 ADC evaluation board and HSC-ADC-EVALCZ capture board, covering hardware setup, software configuration, and FFT data analysis.

View design document

Overview

This technical document provides step-by-step instructions for testing the AD9634 12-bit Analog-to-Digital Converter (ADC) using its customer evaluation board and the HSC-ADC-EVALCZ FPGA-based data capture board. It details the required equipment, including low-jitter clock sources, anti-aliasing filters, and 6V power supplies. The guide outlines software setup for VisualAnalog and SPIController, including FPGA programming and configuration file selection. It also provides a comprehensive troubleshooting section for common issues such as abnormal FFT plots, poor performance metrics, and FIFO capture timeouts.

Use Cases

  • Evaluating the performance of the AD9634 high-speed ADC
  • Configuring FPGA-based data capture systems for analog signals
  • Prototyping data acquisition systems with 12-bit ADCs
  • Testing high-speed ADC signal integrity and noise floor

Topics

Analog Devices
AD9634
ADC
HSC-ADC-EVALCZ
VisualAnalog
SPIController
Data Capture Board
Evaluation Board
Analog-to-Digital Converter
FFT Analysis

Referenced Parts

AD9634

Analog Devices

AD9634 Analog-to-Digital Converter (ADC) Customer Evaluation Board

AD9642

Analog Devices

If using parts branded with "XCPZ", select the AD9642_0.bin file to program the FPGA.

EPS060250UH-PHP-SZ

CUI Inc

6V, 2A switching power supply (such as the CUI EPS060250UH-PHP-SZ supplied)

EPS060250UH-PHP-SZ

CUI

switching power supply (such as the CUI EPS060250UH-PHP-SZ supplied) to the HSC-

EPS060250UH-PHP-SZ

CUI

2. Connect one 6V, 2A switching power supply (such as the CUI EPS060250UH-PHP-SZ