SmartMesh IP Mote CLI Guide
A technical guide describing the Command Line Interface (CLI) for SmartMesh IP motes, including command syntax, radio testing, and diagnostic tools for LTC5800-IPM and LTC5800-IPR.
Overview
This document provides detailed instructions for using the Command Line Interface (CLI) of the SmartMesh IP mote. It is intended for human-interactive development and troubleshooting of sensor applications. The guide covers CLI access via serial connection (9600 bps default), command syntax conventions, and a comprehensive list of commands such as info, mfs (file system), mxtal (crystal calibration), and radiotest (RF diagnostic and compliance testing). It also includes error message definitions and is applicable to the Analog Devices LTC5800-IPM and LTC5800-IPR SoCs and their associated modules.
Use Cases
- Manual troubleshooting of SmartMesh IP motes
- RF compliance testing (EN 300 328)
- Crystal calibration during hardware integration
- Sensor application development and debugging
Topics
Referenced Parts
| LTC5800-IPM | Analog Devices | The Datasheet for the LTC5800-IPM SoC modules |
| LTC5800-IPR | Analog Devices | The Datasheet for the LTC5800-IPR SoC embedded managers |